PT Water Pollution (WP) Self-Test
Water Pollution (WP) Organic Parameters		NELAC/CA Water Pollution (WP) Organic
Water Pollution (WP) Inorganic Parameters		NELAC/CA Water Pollution (WP) Inorganic
Water Supply (WS) Self-Test Products
Why Use AccuStandard PT Products? • ISO17025 Requires Proficiency Testing – using AccuStandard’s AccuTest products are an efficient and cost effective way to comply with this requirement. • Preparing for a Study is easier if you have a program of regular internal QC Checks. • Validation of new techniques, and on-going monitoring of quality is critical to customers. Using PT products as a part of the regular Quality Control scheme adds extra assurance that all analyses are in control. • Training and testing of new technicians is easy with our AccuValues products. The results are sent in a sealed envelope for instant evaluation. Contact us about custom applications. We can supply many ampules at the same concentration for on-going testing, or we can provide subscriptions where random lots are sent at regular intervals.
Suffix Key	"AT" = Pre-Test	"AV" = Values Included
Water Pollution (WP) Organic Parameters
WP-PT VOCs		WS-PT Pesticides
OPE-VOC-002-AT	2 mL	OPE-PEST-006-AT	2 mL
OPE-VOC-002-AV	2 mL	OPE-PEST-006-AV	2 mL
Sample conc. after prep 5.0-50 µg/L		Sample conc. after prep 0.1-10 µg/L
Benzene		Aldrin
Bromodichloromethane		Dieldrin
Bromoform		4,4'-DDD
Bromomethane		4,4'-DDE
Carbon tetrachloride		4,4'-DDT
Chlorobenzene		Heptachlor
Chloroethane		Heptachlor epoxide
Chloroform
Chloromethane		WP-PT Chlordane
Dibromochloromethane		OPE-PEST-007C-AT	2 mL
1,2-Dichlorobenzene		OPE-PEST-007C-AT	2 mL
1,3-Dichlorobenzene		Sample conc. after prep 0.10-20 µg/L
1,4-Dichlorobenzene
Dichlorodifluoromethane		Chlordane
1,1-Dichloroethane
1,2-Dichloroethane		WP-PT Pesticides
1,1-Dichloroethene		OPE-PEST-008-AT	2 mL
Dichloromethane		OPE-PEST-008-AV	2 mL
trans-1,2-Dichloroethene		Sample conc. after prep 0.1-75 µg/L
1,2-Dichloropropane		Contains 7-17 randomly selected analytes from listed below
cis-1,3-Dichloropropene
trans-1,3-Dichloropropene		Aldrin
Ethylbenzene		a-BHC
4-Methyl-2-pentanone (MIBK)		b-BHC
1,1,2,2-Tetrachloroethane		d-BHC
Tetrachloroethene		g-BHC
Toluene		p,p’-DDD
1,1,1-Trichloroethane		p,p’-DDE
1,1,2-Trichloroethane		p,p’-DDT
Trichloroethene		Dieldrin
Trichlorofluoromethane		Endosulfan I
Vinyl chloride		Endosulfan II
		Endosulfan sulfate
WP-PT Aromatic VOCs		Endrin
OPE-AVOC-001C-AT	2 mL	Endrin aldehyde
OPE-AVOC-001C-AV	2 mL	Heptachlor
Sample conc. after prep 5-100 µg/L		Heptachlor epoxide
		Methoxychlor
Benzene
Ethylbenzene
Toluene
1,2-Dichlorobenzene
1,3-Dichlorobenzene
1,4-Dichlorobenzene
WP-PT Halocarbon VOCs		Suffix Key
OPE-HVOC-001C-AT	2 mL	"AT" = Pre-Test
OPE-HVOC-001C-AV	2 mL	"AV" = Values Included
Sample conc. after prep 5-200 µg/L
Bromodichloromethane
Bromoform
Carbon tetrachloride
Chlorobenzene
Chloroform
1,1-Dichloroethene
Dibromochloromethane
1,2-Dichloroethane
Dichloromethane
Tetrachloroethene
Trichloroethene
1,1,1-Trichloroethane
WP-PT PCBs		WP-PT PCBs in Transformer Oil
OPE-PCB-002-SET-AT	2 x 2 mL	OPE-PCB-003-SET-AT	2 x 2 mL
OPE-PCB-002-SET-AV	2 x 2 mL	OPE-PCB-003-SET-AV	2 x 2 mL
Set contains one 2 mL ampule of OPE-PCB-002A (low conc.) & one 2 mL ampule of OPE-PCB-002B (high conc.)		Set contains one 5 mL ample of OPE-PCB-003A (low conc.) & one 5 mL ampule of OPE-PCB-003B (high conc.)
Sample conc. after prep 0.10-15 µg/L Each ampule in the set contains 1 of the Aroclors listed below		Sample conc. after prep 10-60 mg/kg Each ampule in the set contains 1 of the Aroclors listed below
Aroclor 1232		Aroclor 1016/1242
Aroclor 1016/1242		Aroclor 1248
Aroclor 1248		Aroclor 1254
Aroclor 1254		Aroclor 1260
Aroclor 1260
WP-PT SOCs		WP-PT SOC Acids
OPE-SOC-004-AT	2 mL	OPE-SOC-005-AT	2 mL
OPE-SOC-004-AV	2 mL	OPE-SOC-005-AV	2 mL
Sample conc. after prep 10-200 µg/L Contains 6-15 randomly selected analytes listed below		Sample conc. after prep 10-200 µg/L Contains 5-8 randomly selected analytes listed below
Acenaphthene		4-Chloro-3-methylphenol
Acenaphthylene		2-Chlorophenol
Anthracene		o-Cresol
Benzo[a]anthracene		2,4-Dichlorophenol
Benzo[a]pyrene		2,4-Dimethylphenol
Benzo[b]fluoranthene		2,4-Dinitrophenol
Benzo[k]fluoranthene		2-Methyl-4,6-dinitrophenol
Benzo[g,h,i]perylene		2-Nitrophenol
Chrysene		4-Nitrophenol
Dibenzo[a,h]anthracene		Pentachlorophenol
Fluorene		Phenol
Indeno[1,2,3-cd]pyrene		2,4,6-Trichlorophenol
Phenanthrene
Pyrene
Fluoranthene
Naphthalene
bis(2-Ethylhexyl)adipate
Butylbenzylphthalate
bis(2-Ethylhexyl)phthalate
di-n-Butylphthalate
Diethylphthalate
Dimethylphthalate
Water Pollution (WP) / DMR-QA Inorganic Parameters
WP-PT Cyanide		WP-PT Trace Metals
IPE-CN-002-AT	20 mL	IPE-MET-003-AT	20 mL
IPE-CN-002-AV	20 mL	IPE-MET-003-AV	20 mL
Sample conc. after prep	Sample range	Sample conc. after prep	Sample range
Total Cyanide	0.02-1.2 mg/L	Aluminum	50-4500 µg/L
		Antimony	10-1000 µg/L
WP-PT Inorganic Hardness		Arsenic	10-1000 µg/L
IPE-HARD-002-AT	20 mL	Barium	50-3500 µg/L
IPE-HARD-002-AV	20 mL	Beryllium	5-1000 µg/L
Sample conc. after prep	Sample range	Boron	50-2500 µg/L
		Cadmium	5-1000 µg/L
Calcium	3.5-150 mg/L	Chromium	15-1500 µg/L
Magnesium	0.5-50 mg/L	Cobalt	10-1500 µg/L
Total Hardness as CaCO3	15-600 mg/L	Copper	10-1000 µg/L
Ca Hardness as CaCO3	15- 575 mg/L	Iron	25-4500 µg/L
		Lead	30-4000 µg/L
WP-PT Demand		Manganese	50-4500 µg/L
IPE-MIN-006-AT	20 mL	Mercury	0.5-40 µg/L
IPE-MIN-006-AV	20 mL	Molybdenum	20-700 µg/L
Sample conc. after prep	Sample range	Nickel	50-3500 µg/L
		Selenium	20-2500 µg/L
COD	10-500 mg/L	Silver	10-750 µg/L
BOD	10-275 mg/L	Strontium	2-1000 µg/L
cBOD	10-275 mg/L	Thallium	10-1000 µg/L
TOC	5-125 mg/L	Titanium	25-500 µg/L
		Vanadium	50-11500 µg/L
		Zinc	25-2500 µg/L
WP-PT Nutrients #1		WP-PT Oil & Grease & Total Petroleum Hydrocarbon (TPH)
IPE-MIN-007-AT	20 mL	IPE-OILG-001-AT	5 mL
IPE-MIN-007-AV	20 mL	IPE-OILG-001-AV	5 mL
Sample conc. after prep	Sample range	Sample conc. after prep	Sample range
Nitrate-N	0.2-50 mg/L	Total Oil & Grease	5-100 mg/L
Ammonia-N	0.1-20 mg/L	TPH	5-100 mg/L
OrthoPhosphate- P	0.01-6 mg/L
		Technical Note To be used by gravimetric oil and grease methods. In addition, this PT sample can now be used for TPH analysis by gravimetric methods including the EPA method 1664. The sample contains real world material typically present in the environment.
WP-PT Nutrients #2
IPE-MIN-008-AT	20 mL
IPE-MIN-008-AV	20 mL
Sample conc. after prep	Sample range
Total Phosphorous	0.10-15 mg/L
Total Kjeldahl nitrogen as N	0.3-40 mg/L
WP-PT pH		WP-PT Total Phenolics
IPE-PH-001-AT	20 mL	IPE-PHEN-001-AT	20 mL
IPE-PH-001-AV	20 mL	IPE-PHEN-001-AV	20 mL
Sample conc. after prep	Sample range	Sample conc. after prep	Sample range
pH	2-12 units	Total Phenolics	0.03-6 mg/L
WP-PT Inorganic Solids		WP-PT Total Residual Chlorine
IPE-SOL-002-AT	4 mL	IPE-TRC-002-AT	20 mL
IPE-SOL-002-AV	4 mL	IPE-TRC-002-AV	20 mL
Sample conc. after prep	Sample range	Sample conc. after prep	Sample range
Suspended Solids	5-200 mg/L	Total Residual Chlorine	0.10-6.0 mg/L
Dissolved Solids	25-2400 mg/L
Total Solids	30-3000 mg/L
NELAC/CA (WP) Organic PT Samples
WP-PT SOCs		WP-PT CARB
OPE-SOC-011-AT	2 mL	OPE-CARB-003-AT	2 mL
OPE-SOC-011-AV	2 mL	OPE-CARB-003-AV	2 mL
Sample conc. after prep 10-200 µg/L		Sample conc. after prep 5-50 µg/L
2,4-Dinitrotoluene		Carbofuran
2,6-Dinitrotoluene		Karmex (Diuron)
Isophorone		Methomyl
Nitrobenzene		Oxamyl
		Propham
WP-PT SOCs
OPE-SOC-009-AT	2 mL
OPE-SOC-009-AV	2 mL	WP-PT SOCs
Sample conc. after prep 10-200 µg/L		OPE-SOC-012-AT	2 mL
		OPE-SOC-012-AV	2 mL
Benzyl butyl phthalate		Sample conc. after prep 10-200 µg/L
Dibutyl phthalate
Diethyl phthalate		bis(2-Chloroethyl)ether
Dimethyl phthalate		bis(2-Chloroethoxy)methane
Di-n-octyl phthalate		bis(2-Chloroisopropyl)ether
bis(2-ethylhexyl)adipate		4-Bromophenyl phenyl ether
bis(2-ethylhexyl)phthalate		4-Chlorophenyl phenyl ether
WP-PT SOCs		WP-PT SOCs
OPE-SOC-010-AT	2 mL	OPE-SOC-013-AT	2 mL
OPE-SOC-010-AV	2 mL	OPE-SOC-013-AV	2 mL
Sample conc. after prep 10-200 µg/L		Sample conc. after prep 10-200 µg/L
n-Nitrosodimethylamine		2-Chloronaphthalene
n-Nitrosodiphenylamine		1,2,4-Trichlorobenzene
n-Nitrosodi-n-propylamine		Hexachlorobenzene
		Hexachlorobutadiene
		Hexachlorocyclopentadiene
		Hexachloroethane
NELAC/CA (WP) Inorganic PT Samples
WP-PT Hexavalent Chromium		WP-PT MBAS
IPE-HEX-001-AT	20 mL	IPE-MBAS-002-AT	20 mL
IPE-HEX-001-AV	20 mL	IPE-MBAS-002-AV	20 mL
Sample conc. after prep 50-100 µg/L		Sample conc. after prep 500-1000 µg/L
Hexavalent Chromium (Cr+6)		MBAS
WP-PT Metals		WP-PT Boron (non-colorimetric method)
IPE-MET-004-AT	20 mL	IPE-MET-005-AT	20 mL
IPE-MET-004-AV	20 mL	IPE-MET-005-AV	20 mL
Sample conc. after prep 500-1000 µg/L		Sample conc. after prep 20-1500 µg/L
Gold		Boron
Iridium
Palladium
Platinum
Rhodium
Ruthenium
Tin
WP-PT Boron (non-colorimetric method)		WP-PT Nitrite
IPE-MIN-009-AT	20 mL	IPE-MIN-010-AT	20 mL
IPE-MIN-009-AV	20 mL	IPE-MIN-010-AV	20 mL
Sample conc. after prep 20-1500 µg/L		Sample conc. after prep 0.1-10 mg/L
Bromide		Nitrite
WP-PT TOX		WP-PT Silica
IPE-TOX-001-AT	20 mL	IPE-SILICA-002-AT	20 mL
IPE-TOX-001-AV	20 mL	IPE-SILICA-002-AV	20 mL
Sample conc. after prep 5-500 µg/L		Sample conc. after prep 50-300 mg/L
TOX		Silica
WP-PT Turbidity		WP-PT Settleable Solids
IPE-TURB-002-AT	20 mL	IPE-SSOL-001-AT	Neat
IPE-TURB-002-AV	20 mL	IPE-SSOL-001-AV	Neat
Sample conc. after prep 0.5-20 NTU		Sample conc. after prep 2 mL/L to 20 mL/L
Turbidity		Settleable solid
WP-PT Oil & Grease & Total Petroleum Hydrocarbon (TPH)		Technical Note Product is to be used by gravimetric oil and grease methods. In addition, this PT sample can now be used for TPH analysis by gravimetric methods including the EPA Method 1664. The sample contains real world material typically present in the environment.
IPE-OILG-001-AT	5 mL
IPE-OILG-001-AV	5 mL
Total Oil & Grease	5-100 mg/L
TPH	5-100 mg/L

Ask a Question | Custom Quotes
Search | Order Form

© 2002 - 2010 AccuStandard, Inc.