PT Water Supply (WS) Self-Test
       
Water Supply (WS) Organic Parameters NELAC/CA Water Supply (WS) Organic
Water Supply (WS) Inorganic Parameters NELAC/CA Water Supply (WS) Inorganic
   
Water Pollution (WP) Self-Test Products
 
Why Use AccuStandard PT Products?
• ISO 17025 Requires Proficiency Testing – using AccuStandard’s AccuTest products are an efficient and cost effective way to comply with this requirement.
• Preparing for a Study is easier if you have a program of regular internal QC Checks.
• Validation of new techniques, and on-going monitoring of quality is critical to customers. Using PT products as a part of the regular Quality Control scheme adds extra assurance that all analyses are in control.
• Training and testing of new technicians is easy with our AccuValues products. The results are sent in a sealed envelope for instant evaluation.
Contact us about custom applications. We can supply many ampules at the same concentration for on-going testing, or we can provide subscriptions where random lots are sent at regular intervals.
       
Suffix Key "AT" = Pre-Test "AV" = Values Included  
 
Water Supply (WS) Organic Parameters
       
WS-PT Regulated VOCs WS-PT Unregulated VOCs  
OPE-RVOC-001-AT 2 mL OPE-URV-001-AT 2 mL
OPE-RVOC-001-AV 2 mL OPE-URV-001-AV 2 mL
Sample conc. after prep 1-60 µg/L Sample conc. after prep 1-60 µg/L Contains 5 highlighted compounds plus 10-20 selected analytes from the following list:
       
Benzene   Bromobenzene  
Carbon tetrachloride   Bromochloromethane  
Chlorobenzene   Bromomethane  
1,2-Dichlorobenzene   n-Butylbenzene  
1,4-Dichlorobenzene   sec-Butylbenzene  
1,2-Dichloroethane   tert-Butylbenzene  
1,1-Dichloroethene   Chloroethane  
cis-1,2-Dichloroethene   Chloromethane  
trans-1,2-Dichloroethene   2-Chlorotoluene  
Dichloromethane   4-Chlorotoluene  
1,2-Dichloropropane   Dibromomethane  
Ethylbenzene   1,3-Dichlorobenzene  
Styrene   Dichlorodifluoromethane  
Tetrachloroethene   1,1-Dichloroethane  
Toluene   1,3-Dichloropropane  
1,1,1-Trichloroethane   2,2-Dichloropropane  
1,1,2-Trichlororethane   1,1-Dichloropropene  
Trichloroethene   cis-1,3-Dichloropropene  
1,2,4-Trichlorobenzene   trans-1,3-Dichloropropene  
Vinyl chloride   Fluorotrichloromethane  
Total Xylenes (o,m,p)   Hexachlorobutadiene  
    Isopropylbenzene  
WS-PT Trihalomethanes VOCs p-Isopropyltoluene  
OPE-THMV-001-AT 2 mL n-Propylbenzene  
OPE-THMV-001-AV 2 mL 1,1,1,2-Tetrachloroethane  
Sample conc. after prep 1-200 µg/L 1,1,2,2-Tetrachloroethane  
Contains 4 analytes listed below, plus grading for Total THMs 1,2,3-Trichlorobenzene  
    Trichlorotrifluoroethane  
Bromodichloromethane   1,2,4-Trimethylbenzene  
Bromoform   1,2,3-Trichloropropane  
Chlorodibromomethane   1,3,5-Trimethylbenzene  
Chloroform      
Total THMs      
       
WS-PT Organic Disinfection By-Products 1 WS-PT Organic Disinfection By-Products 2
OPE-ODBP-001-AT 2 mL OPE-ODBP-002-AT 2 mL
OPE-ODBP-001-AV 2 mL OPE-ODBP-002-AV 2 mL
Sample conc. after prep 0.1-100 µg/L Sample conc. after prep 0.1-100 µg/L
       
Bromochloroacetic acid   Chloral hydrate  
Dibromoacetic acid      
Dichloroacetic acid   WS-PT EDB/DBCP
Monobromoacetic acid   OPE-EDB-001-AT 2 mL
Monochloroacetic acid   OPE-EDB-001-AV 2 mL
Trichloroacetic acid   Sample conc. after prep 0.05-20 µg/L
       
    1,2-Dibromo-3-chloropropane  
    Ethylene dibromide  
       
WS-PT SOCs #1   WS-PT SOCs #2  
OPE-SOC-001-AT 2 mL OPE-SOC-002-AT 2 mL
OPE-SOC-001-AV 2 mL OPE-SOC-002-AV 2 mL
Sample conc. after prep 0.1-200 µg/L Sample conc. after prep 0.1-900 µg/L  
       
bis(2-Ethylhexyl)adipate   Diquat
  
bis(2-Ethylhexyl)phthalate   Endothall  
Benzo[a]pyrene   Glyphosate  
       
       
WS-PT Regulated Unregulated SOCs WS-PT Pesticides  
OPE-SOC-003-AT 2 mL OPE-PEST-001-AT 2 mL
OPE-SOC-003-AV 2 mL OPE-PEST-001-AV 2 mL
Sample conc. after prep 0.1-200 µg/L
Contains 3 highlighted Regulated compounds plus 2-10 additional randomly from selected analytes listed below		 Sample conc. after prep 0.10-100 µg/L
   
    Aldrin  
Acenaphthene   Dieldrin  
Acenaphthylene   Endrin  
Anthracene   Heptachlor  
Benzo[a]anthracene   Heptachlor epoxide  
Benzo[a]pyrene   Hexachlorobenzene  
Benzo[b]fluoranthene   Hexachlorocyclopentadiene  
Benzo[k]fluoranthene   Lindane  
Benzo[g,h,i]perylene   Methoxychlor  
Chrysene   Propachlor  
Dibenzo[a,h]anthracene   Trifluralin  
Fluorene      
Indeno[1,2,3-cd]pyrene   WS-PT Toxaphene  
Phenanthrene   OPE-PEST-002-AT 2 mL
Pyrene   OPE-PEST-002-AV 2 mL
Fluoranthene   Sample conc. after prep 0.10-25 µg/L
  
Naphthalene      
bis(2-Ethylhexyl)adipate   Toxaphene  
Butylbenzylphthalate      
bis(2-Ethylhexyl)phthalate   WS-PT Chlordane  
di-n-Butylphthalate   OPE-PEST-003-AT 2 mL
Diethylphthalate   OPE-PEST-003-AV 2 mL
Dimethylphthalate   Sample conc. after prep 0.10-25 µg/L
  
       
    Chlordane  
       
WS-PT Pesticides Mix #4   WS-PT Pesticides Mix #5  
OPE-PEST-004-AT 2 mL OPE-PEST-005-AT 2 mL
OPE-PEST-004-AV 2 mL OPE-PEST-005-AV 2 mL
Sample conc. after prep 0.10-50 µg/L Sample conc. after prep 1-50 µg/L
Contains 3-5 randomly selected analytes listed below
       
Alachlor   Butachlor  
Atrazine   Metolachlor  
Simazine   Metribuzin  
    Prometon  
    Bromacil  
       
WS-PT Herbicides   WS-PT Carbamates & Vydate  
OPE-HERB-001-AT 2 mL OPE-CARB-001-AT 2 mL
OPE-HERB-001-AV 2 mL OPE-CARB-001-AV 2 mL
Sample conc. after prep 1.0-175 µg/L Sample conc. after prep 0.1-175 µg/L
       
Acifluorfen   Aldicarb
  
2,4-D   Aldicarb sulfone  
Dalapon   Aldicarb sulfoxide  
Dicamba   Carbofuran  
Dinoseb   Methomyl  
Pentachlorophenol   Oxamyl (Vydate)  
Picloram      
2,4,5-TP (Silvex)      
       
WS-PT PCBs as Decachlorobiphenyl   WS-PT Dioxin  
OPE-PCB-001-AT 2 mL OPE-DIOX-001-AT 2 mL
OPE-PCB-001-AV 2 mL OPE-DIOX-001-AV 2 mL
Sample conc. after prep 0.10-10 µg/L Contains one of the Aroclors listed below Sample conc. after prep 10-100 pg/L
       
Aroclor 1242   2,3,7,8-Tetrachloro-p-dibenzodioxin  
Aroclor 1254      
Aroclor 1260      
       
 
Water Supply (WS) Inorganic Parameters
       
WS-PT Trace Metals #1 WS-PT Trace Metals #2  
IPE-MET-001-AT 2 x 20 mL IPE-MET-002-AT 20 mL
IPE-MET-001-AV 2 x 20 mL IPE-MET-002-AV 20 mL
Sample conc. after prep Sample range Sample conc. after prep Sample range
       
Aluminum 20-4500 µg/L Boron 20-2250 µg/L
Antimony 2-1000 µg/L Molybdenum 3-500 µg/L
Arsenic 2-200 µg/L    
Barium 20-3500 µg/L WS-PT Inorganic Disinfection By-Products
Beryllium 0.5-200 µg/L IPE-DBP-001-AT 20 mL
Cadmium 1-200 µg/L IPE-DBP-001-AV 20 mL
Calcium 3500-110000 µg/L Sample conc. after prep Sample range
Chromium 5-500 µg/L    
Copper 20-2250 µg/L Chlorate 20-200 µg/L
Iron 20-4500 µg/L Chlorite 5-1000 µg/L
Lead 2-200 µg/L Bromate 2-60 µg/L
Manganese 10-1200 µg/L Bromide 10- 600 µg/ L
Mercury 0.5-20 µg/L    
Nickel 5-600 µg/L WS-PT Sulfate/TOC  
Selenium 2-125 µg/L IPE-MIN-002-AT 2 x 20 mL
Silver 2-750 µg/L IPE-MIN-002-AV 2 x 20 mL
Thallium 1-100 µg/L Sample conc. after prep Sample range
Zinc 50-3500 µg/L    
    Sulfate 5-600 mg/L
WS-PT Inorganic Minerals TOC 0.8-6 mg/L
IPE-MIN-001-AT 2 x 20 mL    
IPE-MIN-001-AV 2 x 20 mL WS-PT Residual Free Chlorine  
Sample conc. after prep Sample range IPE-TRC-001-AT 20 mL
    IPE-TRC-001-AV 20 mL
Alkalinity as CaCO3 10-300 mg/L Sample conc. after prep Sample range
Chloride 10-500 mg/L    
Conductivity 25- 2500 umhos Residual Free Chlorine 0.2-6.0 mg/L
Dissolved Solids 50-5000mg/L    
Fluoride 1-10 mg/L WS-PT Turbidity  
Total Hardness as CaCO3 5- 600 mg/L IPE-TURB-001-AT 20 mL
Ca Hardness as CaCO3 40- 500 mg/L IPE-TURB-001-AV 20 mL
Langliers Index 5-125 mg/L Sample conc. after prep Sample range
Nitrate as N 0.5-20 mg/L    
pH 5-10 units Turbidity 0.5-20 NTU
Potassium 2-250 mg/L    
Sodium 5 -500 mg/L WS-PT Nitrate/Nitrite/OrthoPhosphate/Fluoride
Sulfate 2-600 mg/L IPE-MIN-003-AT 20 mL
    IPE-MIN-003-AV 20 mL
WS-PT Cyanide   Sample conc. after prep Sample range
IPE-CN-001-AT 20 mL    
IPE-CN-001-AV 20 mL Nitrate-N 0.5-20 mg/L
Sample conc. after prep Sample range Nitrite-N 0.1-10 mg/L
    OrthoPhosphate-P 0.3-1.7 mg/L
Total Cyanide 0.1-0.5 mg/L Fluoride 0.9-10 mg/L
       
WS-PT Inorganic Hardness   WS-PT Nitrite
IPE-HARD-001-AT 20 mL IPE-MIN-004-AT 20 mL
IPE-HARD-001-AV 20 mL IPE-MIN-004-AV 20 mL
Sample conc. after prep Sample range Sample conc. after prep Sample range
       
Calcium 3.5-110 mg/L Nitrite-N 0.1-10 mg/L
Magnesium 0.5-23 mg/L    
Total Hardness as CaCO3 15-600 mg/L    
Ca Hardness as CaCO3 40- 500 mg/L Suffix Key  
    "AT" = Pre-Test  
WS-PT Inorganic Solids   "AV" = Values Included  
IPE-SOL-001-AT 4 mL    
IPE-SOL-001-AV 4 mL    
Sample conc. after prep Sample range    
       
Suspended Solids 5-200 mg/L    
Dissolved Solids 50-5000 mg/L    
Total solids 50-5200 mg/L    
       
NELAC/CA (WS) Organic PT Samples
       
WS-PT EDB/DBCP/TCP WS-PT Oxygenates  
OPE-EDB-002-AT 2 mL OPE-OXY-001-AT 2 mL
OPE-EDB-002-AV 2 mL OPE-OXY-001-AV 2 mL
Sample conc. after prep 0.05-20 µg/L Sample conc. after prep 5.0-50 µg/L
       
1,2-Dibromo-3-chloropropane
   ETBE  
Ethylene dibromide   Diisopropylether  
1,2,3-Trichloropropane   MTBE  
    TAME  
       
WS-PT Phthalates   WS-PT Carbamates  
OPE-SOC-006-AT 2 mL OPE-CARB-002-AT 2 mL
OPE-SOC-006-AV 2 mL OPE-CARB-002-AV 2 mL
Sample conc. after prep 1-100 µg/L Sample conc. after prep 0.1-150 µg/L
       
Benzyl butyl phthalate   Aldicarb  
Dibutyl phthalate   Aldicarb sulfoxide  
Diethyl phthalate   Aldicarb sulfone  
Dimethyl phthalate   Carbaryl  
Di-n-octyl phthalate   Carbofuran  
bis(2-Ethylhexyl)adipate   Karmex (Diuron)  
bis(2-Ethylhexyl)phthalate   Methomyl  
    3-Hydroxycarbofuran  
    Oxamyl  
       
WS-PT SOCs   WS-PT Pesticides Mix 9  
OPE-SOC-007-AT 2 mL OPE-PEST-009-AT 2 mL
OPE-SOC-007-AV 2 mL OPE-PEST-009-AV 2 mL
Sample conc. after prep 0.1-800 µg/L Sample conc. after prep 0.5-100 µg/L
       
Diquat   Diazinon  
Endothall   Dimethoate  
Glyphosate   Molinate  
Paraquat   Prometryne  
    Thiobencarb  
       
WS-PT Pesticides Mix 10   WS-PT Herbicide  
OPE-PEST-010-AT 2 mL OPE-HERB-002-AT 2 mL
OPE-PEST-010-AV 2 mL OPE-HERB-002-AV 2 mL
Sample conc. after prep 5.0-50 µg/L Sample conc. after prep 1.0-50 µg/L
       
Chlorothalonil   Bentazon  
       
WS-PT PCBs      
OPE-PCB-004-AT 2 mL    
OPE-PCB-004-AV 2 mL    
Sample conc. after prep 0.2-5 µg/L contains 1 of Aroclors listed below    
       
Aroclor 1016/1242   Suffix Key  
Aroclor 1232   "AT" = Pre-Test  
Aroclor 1248   "AV" = Values Included  
Aroclor 1254      
Aroclor 1260      
       
NELAC/CA (WS) Inorganic PT Samples
       
WS-PT MBAS WS-PT Inorganic Minerals  
IPE-MBAS-001-AT 20 mL IPE-MIN-001-AT 20 mL
IPE-MBAS-001-AV 20 mL IPE-MIN-001-AV 20 mL
Sample conc. after prep 0.05-2.0 mg/L Sample conc. after prep Sample range
       
MBAS   Alkalinity as CaCO3 10-300 mg/L
    Chloride 10-500 mg/L
WS-PT Silica Conductivity 25- 2500 umhos
IPE-SILICA-001-AT 20 mL Dissolved Solids 50-5000mg/L
IPE-SILICA-001-AV 20 mL Fluoride 1-10 mg/L
Sample conc. after prep 50-250 mg/L Total Hardness as CaCO3 15- 600 mg/L
    Ca Hardness as CaCO3 40- 500 mg/L
Silica   Langliers Index 5-125 mg/L
    Nitrate as N 0.5-20 mg/L
WS-PT Perchlorate pH 5-10 units
IPE-PER-001-AT 20 mL Potassium 2-250 mg/L
IPE-PER-001-AV 20 mL Sodium 5 -500 mg/L
Sample conc. after prep 10-50 µg/L Sulfate 2-600 mg/L
       
Perchlorate   WS-PT UV-254 Absorbance & TOC  
    IPE-UV/TOC-001-AT 20 mL
    IPE-UV/TOC-001-AV 20 mL
       
    UV-254 Absorbance 0.015 cm-1-0.15 cm-1
    TOC 0.9 mg/L - 5 mg/L
       



Ask a Question | Custom Quotes
Search | Order Form

 

© 2002 - 2009 AccuStandard, Inc.