Aniline Point Verification Standard (68 ºC)

Catalog NumberCat. #
D-611-04
CRM DesignationCRM Designation
Reference Material
Number of ComponentsComps
1
UnitUnit
20 mL
Price(USD)Price
$0.00
  

Additional Information

CRM Designation
Reference Material
Comments
The product is sold as part of a set or kit, and is not available for individual sale.
Storage ConditionStorage
Ambient (>5 °C)
Safety Data SheetSDS
 
 
AnalyteCAS NumberTarget Concentration
n-Heptane142-82-5N/A

Aniline Point Verification Standard (68 ºC)

Double click on above image to view full picture

Zoom Out
Zoom In
Melting Point Melting Point
-90.6°C (-131.0°F)
Boiling Point Boiling Point
98.4°C (209.1°F)
Flash Point Flash Point
25 °F (-4 °C) (cc)
Refer to SDS for detailed product information.
Symbol
HAZ00002 HAZ00003 HAZ00004 HAZ00006
Signal word
Danger
Hazard statements
Aspiration hazard if swallowed - may be harmful if swallowed and enters airways. (Aspiration hazard, catagory 2)
Toxic to fish and other water organisms. (H410)
Vapors may cause drowsiness and dizziness. (Specific target organ toxicity, single exposure; Narcotic effects, Category 3)
Highly Flammable (Flammable liquids, category 2)
Irritating to skin. (Skin corrosion/irritation, category 2)
May be irritating to mucous membrane and upper respiratory system. (Specific target organ toxicity, single exposure; Respiratory tract irritation, category 3)
Precautionary statements

Eye contact: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. (P338)
Skin contact: Immediately wash skin with soap and plenty of water. Remove contaminated clothing. Get medical attention if symptoms occur. Wash clothing before reuse. (P360)
Ingestion: Call a physician or poison control center immediately. If conscious, give water freely. (P310)
Store in a tightly closed container. (P404)
Do not breathe vapor. (P260)
Do not get in eyes, on skin or clothing. (P262)
This product should only by used by persons trained in the safe handling of hazardous chemicals. (P202)
Wash thoroughly after handling. Do not take internally. Eye wash and safety equipment should be readily available. (P264)
Respiratory Protection: If workplace exposure limit(s) of product or any component is exceeded (see TLV/PEL), or a risk assessment shows air-purifying respirators are appropriate, use of a NIOSH/MSHA approved air supplied respirator is advised. Use a full-face respirator with multi-purpose combination (US) or type ABEK (EN14387) respirator cartridges in absence of proper environmental control. Always use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Engineering and/or administrative controls should be implemented to reduce exposure.
Protective gloves must be worn to prevent skin contact. (P280)

UN Number UN #
UN1206
Shipping Class Shp Class
3
Packing Group Packing
II