May cause allergic skin reaction. (Sensitization, skin, category 1) Toxic to fish and other water organisms. (H410) Risk of serious damage to eyes. (Eye damage/irritation, category 1) Danger of serious damage to health by prolonged exposure. (Specific target organ toxicity, repeated exposure, Category 1) May cause long-term adverse effects in the aquatic environment. (H413) May be fatal if inhaled. (Acute toxicity, inhalation, category 2) Toxic if swallowed. (Acute toxicity, oral, category 3) Irritating to skin. (Skin corrosion/irritation, category 2) Causes serious eye damage. (Eye damage/irritation, category 1) This product is or contains a component that is classified (ACGIH, IARC, NTP, OSHA) as a suspect cancer hazard. (Carcinogenicity, category 2)
Precautionary statements
Eye contact: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. (P338) Skin contact: Immediately wash skin with soap and plenty of water. Remove contaminated clothing. Get medical attention if symptoms occur. Wash clothing before reuse. (P360) Store in a tightly closed container. (P404) Store in a cool dry place. (P235) Do not breathe dust. (P260) Do not get in eyes, on skin or clothing. (P262) This product should only by used by persons trained in the safe handling of hazardous chemicals. (P202) Wash thoroughly after handling. Do not take internally. Eye wash and safety equipment should be readily available. (P264) Respiratory Protection: If workplace exposure limit(s) of product or any component is exceeded (see TLV/PEL), or a risk assessment shows air-purifying respirators are appropriate, use of a NIOSH/MSHA approved air supplied respirator is advised. Use a full-face respirator with multi-purpose combination (US) or type ABEK (EN14387) respirator cartridges in absence of proper environmental control. Always use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Engineering and/or administrative controls should be implemented to reduce exposure. Protective gloves must be worn to prevent skin contact. (P280)
