Sorry, there is currently no SDS available for catalog number S-9393N-01-1ML
Analytes
Analyte
CAS Number
Target Concentration
Acetic acid
64-19-7
N/A
Structure
Properties
Molecular FormulaMol. Formula
C2H4O2
Molecular WeightMol. Weight
60.06
Melting PointMelting
16.2 °C/ 61.2 °F
Boiling PointBoiling
117 - 118 °C/ 243 - 244 °F
Flash PointFlash Pt.
39 °C/ 102 °F - closed cup
Safety Information
Refer to SDS for detailed product information.
Symbol
Signal word
Danger
Hazard statements
Flammable liquid and vapor. (Flammable liquids, category 3) May cause skin sensitization. (Sensitization, skin, category 1) Harmful to fish and other water organisms. (H402) Harmful if inhaled. (Acute toxicity, inhalation, category 4) Harmful if absorbed through skin. (Acute toxicity, dermal, category 4) Causes serious eye damage. (Eye damage/irritation, category 1) Causes skin burns. (Skin corrosion/irritation, category 1)
Precautionary statements
Eye contact: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. (P338) Skin contact: Immediately flush skin with plenty amounts of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention immediately. Thoroughly wash (or discard) clothing and shoes before reuse. (P360) Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. (P340) Ingestion: Do NOT induce vomiting. Call a physician or poison control center immediately. Give victim a glass of water a little at a time. Never give anything by mouth to an unconscious person. If vomiting occurs spontaneously, lower head below waist to prevent fluid from entering the lungs. (P331) Store in a tightly closed container. (P404) Do not breathe vapor. (P260) Do not get in eyes, on skin or clothing. (P262) This product should only by used by persons trained in the safe handling of hazardous chemicals. (P202) Wash thoroughly after handling. Do not take internally. Eye wash and safety equipment should be readily available. (P264) Respiratory Protection: If workplace exposure limit(s) of product or any component is exceeded (see TLV/PEL), or a risk assessment shows air-purifying respirators are appropriate, use of a NIOSH/MSHA approved air supplied respirator is advised. Use a full-face respirator with multi-purpose combination (US) or type ABEK (EN14387) respirator cartridges in absence of proper environmental control. Always use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Engineering and/or administrative controls should be implemented to reduce exposure. Protective gloves must be worn to prevent skin contact. (P280)
